Hyundai H- CDM8039 Car Stereo System User Manual


 
11
General operations
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press OPEN button on the panel to open the panel and press the RESET button with thin hard object to restore the unit to
the original factory settings.
Power ON/OFF
Press any button to turn the unit on. Press and hold POWER button to turn off the unit.
Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the unit on it
will resume the stored status, which you set.
Display (DISP)
Press DISP button to switch between display information such as radio frequencies, clock, track and other information
depending on the playing MODE.
To adjust the time:
 Press DISP button until clock is showed, press the DISP button and hold for 2 seconds. Time will start blinking.
 Rotate the VOL knob clockwise to adjust minute.
 Rotate the VOL knob anticlockwise to adjust hour.
 Press DISP button again to save setting.
Mode
By pressing this button, user can select: AUX/TUNER/S-CDP(CD-MP3)/USB/MMC/SD mode.