Filter
Top Products
8
Inserting the batteries in the remote control
1. Pull out the battery holder while pressing the stopper.
2. 2. Insert the button-type battery with the stamped(+) mark facing upward.
Insert the battery holder into the remote control.
Note:
· When the range of the operation of the card remote control becomes short or no functions while operating. Replace the battery with a new lithium battery.
Make sure the battery polarity replacement.
Button tips
Disc Load / Eject
Load: press OPEN button to slide down the panel. Insert the disc into the slot.
In addition to ordinary CDs, this unit can playback a CD - R or CD - RW.
Eject: press OPEN button to slide down the panel. Press to eject the disc.
Note:
· When close the panel, press button should no function.
Radio
Radio tune by step: rotate the dial less than 0.5 seconds.
Radio seeks automatically: rotate the dial more than 0.5
Disc Playback
Track skip: rotate the dial less than 0.5 seconds to go to the next or previous track.
Track seeks: rotate the dial more than 0.5 seconds and hold it to fast forward or reverse back the track.
AS/PS: Auto Memory Store And Preset Scan Store
Press less than 2 seconds to scan the preset station for 5 seconds each. Press more than 2 seconds, the 6 strongest available stations will be
automatically saved in the memory of preset button.