Filter
Top Products
14
The clock can be set anytime when the power is on. Press CLK button and then press and hold CLK button for 3
seconds, the time will blink on the display.
1. Rotate VOL knob clockwise to adjust the hour.
2. Rotate VOL knob anti-clockwise to adjust the minute.
3. Press CLK button again or leave the unit idle for new setting to take effect.
Press CLK button anytime to view the time display.
DSP mode
Press and hold VOL knob for 2 seconds, the display will show DSP OFF. Rotate VOL knob to select DSP effect.
POP ROCK CLASSIC FLAT DSP OFF
After you have selected your desired effect, leave the unit idle in order for the new setting to take effect.
Auxiliary input, RCA output
1. Auxiliary Input
Insert the AUX IN cable stereo plug into the AUX IN jack on the rear panel of the unit. Route the other end of the
stereo plug to the headphone jack of any external audio device such as MP3 player. Press MOD button to choose
AUX mode. Use the volume control to adjust volume.
2. RCA Output
The RCA output jack is on the back of the unit. This output is for connecting amplifier, equalizer, or other audio
device. Follow the manufacturers instructions for the audio device that you are connecting.