Filter
Top Products
12
Press / buttons on the panel or press the cursor buttons on the RC to select the submenu:
AUDIO => PICTURE => SETUP.
Press MENU button on the panel or ENTER button on the RC to enter the submenu selected.
Press / buttons on the panel or press the cursor buttons on the RC to select the setting:
For AUDIO submenu: VOLUME => BASS => TREBLE => BALANCE => FADER => EQ => LOUD
=> SUB.W.
For PICTURE submenu: BRIGHT => CONTRAST => COLOR => TINT => DEFAULT.
For SETUP submenu: SYSTEM => CLOCK.
When the setting is selected press MENU button on the panel to activate the setting, rotate the VOL knob
to adjust the setting. Or press the buttons on the RC to adjust the setting.
Wait for several seconds or press ENTER button on the RC, the setting will be saved automatically.
Note:
If turning off the power all the settings of each mode will be saved.
If turning off the ACC power or reset the unit all the settings will become as they were set on the plant.
If you don’t adjust a setting within several seconds after selecting the desired setting, the unit will
automatically return to the current mode being displayed.
“Back” function
To return to previous menu window press BACK button on the RC or PWR/BACK button on the panel.
Clock setting
Displaying the time: Press MENU button, then select SETUP => SYSTEM menu. In TIME item, rotate VOL
knob to select ON to display the time. In TIME.M item, rotate VOL knob to select the format of time displayed
(12/24).
Adjusting the time: Press MENU button, then select SETUP => SYSTEM menu. In CLOCK item, press
/ buttons on the panel or press the cursor buttons on the RC to select minutes or hours to adjust,
rotate VOL knob or press buttons on the RC to adjust minutes and hours.