Filter
Top Products
21
OR:
During radio mode press the 7/8 buttons on the panel or / buttons on the RC buttons to select upward
or downward stored stations.
AMS function (Auto Memory Store)
Preset scan: press AMS button for less than 1 second to scan all preset stations in the memory of the current
band and stay on each memory stations for about 5 seconds. To stop preset scan, press AMS button again.
Auto memory store: press AMS button for more than 2 seconds to enter auto store mode. The radio will
automatically store 6 strongest stations to the 6 preset memories of the current band. To stop auto store, press
AMS button again.
AF function (Alternative Frequencies)
Press AF button to turn on or turn off the AF function. The RDS program will be automatically searched and
received. After turning on, if the RDS signal is week or even no signal, the unit will search another frequency with
this RDS program.
PS (Program Service name): the name of station will be display instead of frequency.
Note: AF indicator on LCD will flash until RDS information is received. If RDS service is not available in your area,
turn off the AF mode.
Press and hold AF button for more then 2 seconds, the unit will be under REGION ON or REGION OFF mode:
REG ON: AF function will implement the regional code (of the PI) and only stations in the current region can be
tuned automatically;
REG OFF: AF function will ignore the regional code (of the PI) and stations in the other regions can also be
tuned automatically.