Filter
Top Products
5
SPECIFICATIONS
19
■ General
•Frequency coverage: 01.800–01.999 MHz
03.500–13.999 MHz
07.000–17.300 MHz
10.100–10.150 MHz
14.000–14.350 MHz
18.068–18.168 MHz
21.000–21.450 MHz
24.890–24.990 MHz*
1
28.000–29.700 MHz*
1
50.000–54.000 MHz
*
1
The U.S.A. version can only be
used the antenna tuner on the
24–28 MHz bands.
•Antenna connector :
Input PL-239×2 (50 Ω)
Output PL-239×4 (50 Ω)
•Usable temperature : –10°C to 40°C (14°F to 104°F)
range
•Power supply requirement:
non-Europe versions
100–120 V AC or
200–240 V AC (±10 %)
Europe version 230 V AC
(±10 %)
•Dimensions
(W × H × D):
Linear amplifier 350 × 265 × 375 mm
13
25
⁄
32
× 10
7
⁄
16
× 14
3
⁄
4 in
Remote controller 205 × 71 × 68.3 mm
8
1
⁄
16
× 2
25
⁄
32
× 2
11
⁄
16 in
(Projections not included)
•Weight : Approx. 25 kg (55 lb)
(incl. remote controller)
•CI-V connector : 2-conductor 3.5(d) mm (
1
⁄8")
■ Transmitter
•Output power :
•Driving power : 100 W max.
•Spurious emissions : –60 dB
(HF bands)
–70 dB (50 MHz band)
•SEND connector : Phono (RCA)
•ALC connector : Phono (RCA)
■ Antenna tuner
•Matching impedance range:
HF bands*
2
16.7 to 150 Ω unbalanced
(Less than VSWR 3:1)
50 MHz band 20 to 125 Ω unbalanced
(Less than VSWR 2.5:1)
*
2
The U.S.A. version can only be tuned within
1.80–1.95 MHz of the 1.8 MHz band.
•Minimum operating input power:
60 W
•Tuning accuracy : VSWR 1.5:1 or less
•Insertion loss : Less than 1.0 dB
(after tuning)
MODE
INPUT AC VOLTAGE
200–240 V AC 100–120 V AC
CW, RTTY 1 kW 500 W
SSB 1 kW PEP 500 W PEP
DECLARATION
OF CONFORMITY
We Icom Inc. Japan
1-1-32, Kamiminami, Hirano-ku
Osaka 547-0003, Japan
Kind of equipment: HF+
50 MHz 1 kW LINEAR AMPLIFIER
Type-designation: iPW1EURO+ OPC-853
Declare on our sole responsibility that this equipment complies with the
essential requirements of the Radio and Telecommunications Terminal
Equipment Directive, 1999/5/EC, and that any applicable Essential Test
Suite measurements have been performed.
Version (where applicable):
Signature
H.Ikegami
General Manager
Authorized representative name
Icom (Europe) GmbH
Himmelgeister straße 100
D-40225 Düsseldorf
Place and date of issue
Düsseldorf 1st Dec. 2006
This compliance is based on conformity according to Annex III of the
directive 1999/5/EC using the following harmonised standards:
i) Article 3.1a EN 60950-1 (2001)
EN60065:2002 +A1:2006 (Power supply)
EN60065:1998 (Power supply)
ii) Article 3.1b EN 301489-1 and EN 301489-15
iii) Article 3.2 EN 301 783-2