Filter
Top Products
ENGLISH
Menu : 3
(Analog)
Japanese
Adjustment Item
Menu:3
1280 × 1024
H:80.0KHz V:75.0Hz
Problem / Option Button to Press
OSD Position
1 2 3 4 5
You can move the OSD display area
to any one of the following 5 positions
within the overall display:
Italiano
Language
English
Deutsch
English
German
Français
Español
French
Spanish
Press the + Button to move the OSD in numerical order. Press
the – Button to move the OSD in reverse numerical order.
Too soft
Too loud
Volume
Direct
Return to Menu
Highlight “Menu : 3” again.
Reset
NO
YES
Return to Menu.
Factory-preset data is restored.
NOTE is displayed while Mute is active.
Auto
Analog
Select the signal input automatically.
Select the Analog input (D-SUB).
Signal Select *
1
Direct
When both Analogue and Digital cables are connected, you can switch between them
using the direct access facility described earlier. If only one input is present, this will
automatically be selected. In Power Management Mode input switching is disabled.
NOTE
See page 14 for Direct adjustment.
Direct
OSD Off Timer
Set the OSD Off Timer for 3-60 seconds.
Digital
Select the Digital input (DVI-D).
OPERATING THE MONITOR 18
*
1
Available for ProLite E1902S / E1902WS / B1902S only.
Italian