Filter
Top Products
ENGLISH
OPERATING THE MONITOR 13
Adjustment Item Problem / Option Button to Press
Audio
Volume
Too soft
Too loud
Mute
Return the sound volume to the previous level.
Turn off the sound temporarily.
Off
On
Input Select
When only one of the two signal inputs is connected to the signal source, the one
connected is automatically selected. Input Select function is not available if there is no
signal input from the selected connector or during the power management mode.
NOTE
Select the Analog input.
Select the Digital input.
D-sub
DVI
Adjustment Item Problem / Option Button to Press
Input Select
Mute On and Off are switched as follows by pressing the Button successively.
On Off
NOTE
You can skip the Menu items and display an adjustment scale directly by using the following
button operations.
z Volume: Press the Exit Button when the Menu is not displayed.
Direct
Direct
Available for ProLite E2001WS / E2003WS only.
Adjustment Item Problem / Option Button to Press
Miscellaneous
DCR
Increased Contrast Ratio
On
Off
Typical Contrast Ratio
OD
You can set the OverDrive level between 0 and 5. It will
improve the gray level response time of the LCD panel. A
higher level results in a faster response time.
0 1 2 3 4 5
PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:1917