Iiyama E2202WS Car Video System User Manual


 
ENGLISH
APPENDIX
SPECIFICATIONS: ProLite E2201W
LCD Panel
Size
Driving system
a-Si TFT Active Matrix
Diagonal: 56cm / 22"
0.282mm H × 0.282mm V
Response time
Pixel pitch
5ms (Black, white, black), 2ms (Gray to Gray)
Display Colors
Approx. 16.7 million maximum
Sync Frequency
Dot Clock
162MHz maximum
Maximum Resolution
1680 × 1050, 1.8 MegaPixels
Input Connector
Input Sync Signal
Plug & Play VESA DDC2B
TM
49W maximum, Power management mode: 2W maximum*Power Consumption
Dimensions / Net Weight 507.0 × 410.5 × 209.5mm / 20.0 × 16.2 × 8.3" (W×H×D), 5.8kg / 12.8lbs
Up: 20 degrees, Down: 5 degrees
Viewable angle
Right / Left: 85 degrees each, Up / Down: 80 degrees each
Maximum Screen Size 473.8mm W × 296.1mm H / 18.7" W × 11.7" H
Power Source 100-240VAC, 50/60Hz, 1.5A
Environmental
Considerations
Approvals
Tilt Angle
* Condition: Audio equipment is not connected.
NOTE
Brightness
Contrast ratio
300cd/m
2
(Typical)
1000 : 1 (Typical), 2000:1 (DCR)
Input Video Signal
Operating: Temperature
Humidity
Storage: Temperature -20 to 60°C / -4 to 140°F
Humidity
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
5 to 85% (No condensation)
Separate sync: TTL, Positive or Negative
D-Sub mini 15pin, DVI-D 24pin
Analog: 0.7Vp-p (Standard), 75Ω, Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Analog: Horizontal 24.0-80.0kHz, Vertical 55-75Hz
Digital: Horizontal 31.0-80.0kHz, Vertical 55-75Hz
TCO ’03, CE, TÜV-GS, TÜV-Ergonomics, FCC-B, UL / C-UL, VCCI-B,
GOST-R, CCC
APPENDIX 27