Filter
Top Products
IL60 L/R
7
Controls and Connections
SPEAKER
OUTPUTS
+- +-
SPEAKER
OUTPUTS
+- +-
(ONE CHANNEL SHOWN)
AMPLIFIER/RECEIVER
LEFT RIGHT
AMPLIFIER/RECEIVER
SPEAKER OUTPUTS
(ONE CHANNEL SHOWN)
PREAMP OUTPUTS AMPLIFIER INPUTS
L
RR
L
®
O
+
1. LOOSEN TERMINALS
2. INSERT BARE END:
TIGHTEN TERMINALS
3. SET
INPUT SUB
TO "LINE LEVEL"
4. SET
LOW-PASS FILTER
"ON"
METHOD 2
NO STRIPE = -
BLACK = -
STRIPE= +
RED = +
O
00354
+
®
00359-2
1. LOOSEN TERMINALS
2. INSERT BARE END:
TIGHTEN TERMINALS
3. SET
INPUT SUB
TO "SPEAKER"
4. SET
LOW-PASS FILTER
"ON"
METHOD 1
NO STRIPE = -
BLACK = -
STRIPE= +
RED = +
AC CORD
AC CORD
The Interlude IL50 and IL60 offer unprecedented flexibility for connecting the
system to any type of audio or home-theater system. Consult the table at right
to determine which system description most closely matches your own, then
follow the hook-up method corresponding to that system.
If none of these system configurations seem to match yours, consult your dealer
or Infinity customer service for direction on how best to hook up your system.
For methods 2, 3a, 3b and 4, make sure all bass-management features are
properly set. The Audio channels should all be set to “Small” or “High-Pass”
and the subwoofer set to “On.”
2-Channel receiver or integrated amplifier 1
that has no subwoofer output or
Pre-out/Main-In connectors
2-Channel receiver or integrated amplifier 2
with preamp output and input connectors
2-Channel system with separate preamplifier 2
and power amplifier
Dolby* Pro Logic* with THX
®
, Dolby Digital, 3a
or DTS
®
receiver with a filtered subwoofer
(or LFE) output connector
Dolby Digital or DTS processor with separate 3b
power amplifiers or multichannel amplifier
Non-THX certified Dolby Pro Logic receiver 4
with full-range subwoofer outputs
System Type
Connection
Methods
4
3
4
3