Filter
Top Products
8
Insignia NS-C3113 Car CD Deck
www.insignia-products.com
4 Rotate the VOL/SEL knob so that the second
number changes to a 4, then press VOL/SEL
to select that number. The LCD shows “TRK
045.”
When you have selected the second number,
the first number (0) blinks for five seconds.
5 Rotate the VOL/SEL knob so that the first
number changes to a 2, then press VOL/SEL
to select that number. The LCD shows “TRK
245.”
6 Press VOL/SEL to play track 245.
Searching files in MP3 mode
In this example, we are searching for the third
file (3.MP3) in folder CD 03. The disc file
structure looks like this:
To search files on an MP3 disc:
1 Press AMS twice to enter the file search
mode. The LCD shows “FILE SCH.”
2 Press VOL/SEL. The LCD shows CD 01
blinking (indicating the first folder on the
disc).
3 Rotate the VOL/SEL knob until “CD 03”
appears (blinking) on the LCD, then press
VOL/SEL to select that folder on the disc.
The LCD shows 01 blinking (indicating the
first file in that folder).
4 Rotate the VOL/SEL knob until “03” is
blinking on the LCD, then press VOL/SEL to
select that file.
Searching characters (file names) in MP3 mode
In this example, we are searching for file name
cx.MP3 on the disc. The disc file structure looks
like this:
To search file names on an MP3 disc:
1 Press AMS three times to enter the character
(file name) search mode. The LCD shows
“CHAR SCH.”
2 Press VOL/SEL. The LCD shows a blinking
A (the first letter of the file name).
3 Rotate the VOL/SEL knob until a blinking “C”
appears on the LCD, then press VOL/SEL to
select it as the first letter of the file name.
CA is now shown on the LCD, with the “A”
blinking.
4 Rotate the VOL/SEL knob until “X” is blinking
on the LCD, then press and hold VOL/SEL to
select that letter and file.
5 Press VOL/SEL and file cx.MP3 is played.
Using the radio
To use the radio:
1 Press (power)/MODE to turn on the CD
deck.
2 Press (power)/MODE repeatedly to select
TUNER.
3 Press BAND to cycle through the following
bands:
FM1 - FM2 - FM3 - MW1 (AM1) - MW2
(AM2).
• To manually tune the radio—Press
(next) or (previous) to select a station
with a higher or lower frequency,
respectively.
• To automatically tune the radio—Press
and hold (next) or (previous) for
more than three seconds. The radio tunes
to, and plays, the next available station
(up or down, respectively).
• To automatically store stations in
preset memory—Press and hold AMS
for more than three seconds. The radio
automatically scans the available stations
and stores the six strongest stations in
presets 1 through 6.
• To manually store stations in preset
memory—Tune to the desired station,
then press a number button for more than
three seconds (until the LCD shows the
number). The station is stored as a preset
using that number button. Repeat for each
button, in each band.
• To tune to a preset channel—Select the
band you want, then press the desired
preset button (1-6).
• To play each of your preset channels
for a few seconds—Press AMS. Press
AMS again to play a station while it is
being previewed.
4 To turn the player off, press and hold the
(power)/MODE button until it turns off.
Note
If you press VOL/SEL more than three seconds,
the 45th track is played.
CD 01
CD 02
CD 03
CD 01
CD 02
CD 03
Note
If you press VOL/SEL more than .5 seconds, the
first file that begins with “C” is played.
Note
For clarity, the example above uses simple
character files. In actual operation, longer file
names are typically used, possibly requiring
several more steps to find the file you are looking
for.