Filter
Top Products
13
Insignia NS-D7PDVD Dual-Screen Portable DVD Player
www.insigniaproducts.com
Using your player
Playing a DVD or audio CD
To play a disc:
1 Make sure that your player is connected to power.
2 Slide the ON/OFF switch to the ON position.
3 Press the OPEN knob. The disc tray opens. For the location of the
OPEN knob, see “DVD player” on page 5.
4 Place a disc, label side up, in the disc tray, then close the tray. The disc
starts playing automatically.
Controlling DVD or audio CD playback
To control disc playback:
• Press (STOP) once to stop playback. Your player remembers
where you stopped. If you press , your player starts playing
at the point where you stopped.
• Press (STOP) twice to stop playback. If you press , your
player starts playing at the beginning of the disc.
• Press to pause playback. Press this button again to resume
playback.
• Press on the remote control or press and hold (NEXT)
on the front of your player to fast-forward on the disc. Each
time you press this button, the fast-forward speed changes
from 2 to 4 to 8 to 16 to 32 times the normal speed.
• Press on the remote control or press and hold (PREV) to
fast-reverse on the disc. Each time you press this button, the
fast-reverse speed changes from 2 to 4 to 8 to 16 to 32 times
the normal speed.
• Press (NEXT) to go to the next title, chapter, or track.
• Press (PREV) to go to the previous title, chapter, or track.
Note
Most DVDs and your player have region codes that help control
illegal distribution of DVDs. The region code for your player is 1.
You can only play DVDs with a region code of 1 or ALL. The
region code for a DVD is printed on the DVD or the DVD
packaging.
Note
When playing an audio CD, press STOP once to stop
playback and return the player to the beginning of
the CD.