Filter
Top Products
8
NS-HD5113 Insignia NS-HD5113 Car HD Radio CD Deck with USB Port
www.insigniaproducts.com
5 Press VOL/SEL and file cx.MP3 is played.
Using the radio
To use the radio:
1 Press (power), or PWR on the remote control,
to turn on the HD radio CD deck.
2 Press MODE repeatedly to select TUNER.
3 Press BAND to cycle through the following
bands:
FM1 - FM2 - FM3 - MW1 (AM1) - MW2 (AM2).
• To manually tune the radio—Press
(next) or (previous) on the head unit, or
SEARCH or SEARCH on the remote
control for more than three seconds (until
MANUAL appears on the LCD, then press that
button again to select a station with a higher
or lower frequency, respectively.
• To automatically tune the radio—When
manual tuning does not work, the radio
switches to automatic tuning and AUTO
appears on the LCD. Press (next) or
(previous), or SEARCH or SEARCH on
the remote control, for more than three
seconds. The radio tunes to, and plays, the
next available station (up or down,
respectively).
• To automatically scan for stations — Press
SCAN on the remote control. The radio
automatically tunes up through the available
radio stations, pausing at each station for five
seconds. Press SCAN again to stop scanning
and listen to a station.
• To automatically store stations in preset
memory—Press and hold AMS for more than
three seconds. The radio automatically scans
the available stations and stores the six
strongest stations in presets 1 through 6.
• To manually store stations in preset
memory—Tune to the desired station, then
press a number button for more than two
seconds (until the LCD shows the number).
The station is stored as a preset using that
number button. Repeat for each button, in
each band.
• To tune to a preset channel—Select the
band you want, then press the desired preset
button (1-6).
• To play each of your preset channels for a
few seconds—Press AMS. Press AMS again,
or a number button, to play a station while it is
being previewed.
4 To turn the car HD radio CD deck off, press and
hold (power), or PWR on the remote control,
until it turns off.
Listening to HD Radio stations
To listen to HD Radio:
1 In radio mode, press and hold HD until the LCD
shows HD-SEEK On.
2 Press (next) or (previous), or
SEARCH or SEARCH on the remote
control, to tune the radio up or down.
3 Press HD again to turn off HD Radio. HD-SEEK
OFF appears on the LCD.
Playing your iPod through your HD radio CD
deck
To play your iPod through your HD radio CD
deck:
1 Connect your iPod to the iPod wire in the back
of the radio. See “Wiring your car HD radio CD
deck” on page 5 for the location of the wire.
2 Press (power), or PWR on the remote control,
to turn on the HD radio CD deck.
3 Press MODE repeatedly to select iPod.
• To go to the next or previous track, press
(next) or (previous), or SEARCH or
SEARCH on the remote control, respectively.
• To fast forward or fast reverse the track, press
and hold (next) or (previous), or
SEARCH or SEARCH on the remote
control, respectively.
• Press 1/ (play/pause) to pause playback.
Press 1/ (play/pause) again to resume
playback.
• Press 3/RPT to repeat the current iPod track.
Press 3/RPT again to repeat all tracks. Press
3/RPT again to resume normal playback.
• Press 4/RDM to play the iPod tracks in random
order (shuffle). Press 4/RDM again to resume
normal playback.
• Press DISP to display information about the
current track playing.
• Press 5/DN to search for a specific track on
your iPod.
• Press 6/UP to go back to the previous
directory on your iPod.
4 To exit iPod mode, remove your iPod. Your HD
radio CD deck reverts to radio mode.
Using iTAG
ITAG lets you capture information about a song
playing on the radio.
To use iTAG:
1 Press and hold EQ/ITAG to capture information
about a song currently playing on the radio.
Your HD radio CD deck stores the information.
2 Connect your iPod to your HD radio CD deck.
Your radio uploads the iTAG information to your
iPod.
Using your car HD radio CD deck in the AUX
mode
To use your CD deck with an external audio
device:
1 Press (power), or PWR on the remote control,
to turn on the car HD radio CD deck.
2 Connect an optional portable audio source to
the AUX jack on the front panel.
3 Press MODE repeatedly to select AUX.
4 Play music on the device to listen to it through
your car speakers.
Note
For clarity, the example above uses simple character
files. In actual operation, longer file names are
typically used, possibly requiring several more steps
to find the file you are looking for.
NS-HD5113_09-0642_MAN_ENG_V3.book Page 8 Thursday, July 30, 2009 12:52 PM