Filter
Top Products
Tweeter Flush Angle Mounting
Instructions
a) Follow steps a through c in the Tweeter
Flush Mounting Instructions.
b) Secure the Flush Angle Mount Adapter
to the Flush Mount Cup using two
5
⁄
16
"
screws as shown in Figure J.
c) Connect the 408 and 508GTi speaker
wires (from the crossover) to the tweeter,
observing correct polarity (see figure K for
details).
d) Press the tweeter down onto the Flush
Angle Mount Adapter lower portion, making
sure to line up the snaps with the slots in
the tweeter housing.
e) Snap the other portion of the tweeter
down onto the angle adapter.
11
Figure J
E
D
TWEETER FLUSH ANGLE
INSTALLATION
408/508 MANUAL.QXP 7/17/98 11:21 AM Page 11