JBL 552 Car Speaker User Manual


 
INSTALLATION
Figure 4. Mounting the P652 and P652s using the
supplied grilles.
Figure 6. Mounting the P652 and P652s in
standard speaker locations.
Figure 3. Mounting the P8652 and P6452.
NOTE: The P6452 and P8652 speakers are
designed to be installed under factory grilles.
Consequently, no grilles are packaged with
these Power Series models.
Figure 3a.
Rotate tweeter so it is angled
toward the listener using the
UniPivot
(patent no. 6,002,780)
feature on the P552, P652 and P8652.
Tweeter
terminals
on top
Woofer
terminals
on bottom
GreenYellow
BlueWhite
BlackRed
NOTE:The P652 and P652s use an adapter to
fit a variety of different 6" openings. Select
an appropriate adapter ring and secure it to
the vehicle using the sheet-metal screws
provided, then attach the speaker to the ring
with the machine screws.
Figure 5.
Mounting the P652 and P652s in 165mm speaker
locations.
Figure 7.
Connecting an in-line crossover to a P652 and
an amplifier output. Other speaker models are
connected in a similar way.
NOTE:The positions shown here for the
polarities may not resemble the exact
connections in every installation. However,
in every case, the larger terminal is the
positive (+) connection.
P452/552/652/953 OM 1/27/03 3:36 PM Page 3