JBL AS6 Car Speaker User Manual


 
AS65C
Step One:
Remove the grille from the
speaker frame.
Step Two:
Determine the correct speaker
location.
1-1/2"
1-1/2"
1-1/2"
Step Three:
Cut the drywall.
Step Five:
Loosen the three phillips head
screws on the frame until the
locking tabs turn inward.
Step Four:
Connect the speaker wires to
the speaker.
Step Six:
Place the frame assembly in
the wall.
Step Seven:
Screw down each of the three
phillips head screws. The tabs
will swivel into place and
secure the unit to the rear
surface of the drywall.
Step Eight:
Replace the metal grille.
AS Series Owner’s Manual 9/11/98 12:51 PM Page 8