JBL AS8 Car Speaker User Manual


 
New Construction
Step One:
Remove the grille from the
speaker frame.
Step Three:
Attach the proper mounting
brackets, marked and preset at
3/8", 1/2", 5/8", and 3/4", corre-
sponding to the thickness of
the dry wall, to the speaker
frame.
Step Two:
Determine the correct speaker
location.
1-1/2"
1-1/2"
1-1/2"
Step Four:
Nail or screw the speaker-frame
assembly to the wall studs and
route the wires through the
frame opening.
Step Five:
Cut the drywall.
Step Six:
Connect the speaker wires to
the baffle assembly and install
baffle assembly in frame. Do
not overtighten the baffle
screws.
Step Seven:
Replace the metal grille.
After the Drywall is Installed
AS Series Owner’s Manual 9/11/98 12:51 PM Page 6