Filter
Top Products
Figure 1. Mounting the woofer in a factory
location without the grille.
Figure 2. Mounting the woofer with
the grille.
I-MOUNT
™
FLUSH-MOUNT
Figure 3A. Mounting the tweeter using the
I-Mount flush-mounting kit.
I-MOUNT SURFACE-MOUNT
Figure 3B. Mounting the tweeter using the
I-Mount surface-mounting cup.
TWEETER ANGLE
Figure 4. Aim the tweeter at the listening
position by sliding the screw in the groove
on the back of the tweeter cup and lock the
tweeter in place using the small retaining
screw. Rotate the entire assembly in the
mounting surface and tighten the large
hand nut.
Note: Check screw clearance before
installing. Use glue if clearance is an issue.
Note: Not all possible mounting
configurations are shown.
3
INSTALLATION
2
3
(
—) SMALL LUG
(+) LARGE LUG
BLACK
RED
RED (+)
RED (+)
BLACK (—)
BLACK (—)
1
ATTACH BASE
WITH SCREWS, THEN:
1
2
3
1
S
LIDE SCREW UP OR
D
OWN TO ADJUST
TWEETER ANGLE.
4
SECURELY TIGHTEN
THE LARGE HAND NUT.
2
TIGHTEN SCREW TO
LOCK ANGLE SETTINGS.
3
ROTATE ENTIRE ASSEMBLY
TO AIM ANGLED TWEETER
TOWARD LISTENER.