Jensen MP6512i Car Stereo System User Manual


 
MP6512i
10
TUNER OPERATION
The MP6512i allows you to receive channels in U.S.A. or EUROPE mode.
See “Frequency Spacing (AREA SET)” on page 9 to learn how to change
the tuner options.
Select a Band
Press the BAND button (3) to change between three FM and two AM
bands. Each band stores up to six preset stations.
Tuning
Auto Seek Tuning
Press the TUNE/TRACK >>| or |<< buttons (19) to move to the next/
previous station automatically.
Manual Tuning
Press and hold the TUNE/TRACK >>| or |<< buttons (19) for more than
three seconds to enter manual tuning mode. Next, press the >>| or |<<
buttons to move the radio frequency number up or down one step.
Preset Stations
Up to six stations on each band can be stored as presets, which can then
be instantly recalled by pressing the associated preset button (14). To store
a station, turn the radio on and select the desired band and station. Press
and hold the desired preset button (numbered one through six on the face
of the radio) for more than two seconds. When stored, the preset number
will appear in the display. The station is now stored and can be recalled by
pressing the corresponding preset button. Repeat for the remaining five
presets on the current band and for presets on the other four bands.
Preview Scan
Press the SCAN button (16) to scan all strong stations in the current band.
The unit will stop at each station for five seconds before continuing to the
next station. Press SCAN again to stop scanning and listen to the current
station.
Automatic Store (AS)
Select six strong stations and store them in the current band using the
Automatic Store feature. To enable this feature, press the AS button (15).
The radio will automatically “SEARCH” the band in use and enter strong
stations into the preset memory positions for that band. After entering the
stations into memory, the unit will automatically stop at each station for five
seconds, allowing you to preview each selection. When using the Automatic
Store feature, the new stations replace any stations already stored in preset
memory for the selected band.
Program Type (PTY)
PTY defines the type of program being broadcast, when applicable. Not all
stations are broadcast with PTY information. You can use the PTY function
to play stations broadcast in the following categories:
All PTY (any station with PTY information is searched)
Traffic (the TA (Traffic Announcement) icon appears lit when a station
broadcasting PTY Traffic Reports is selected)
News
Information
Sports
Talk
Rock
Classic Rock
Adult Hits
Soft Rock
Top 40
Country
Oldies
Soft
Nostalgia
Jazz
Classical
Rhythm and Blues
Soft Rhythm and Blues
MP6512i
/
SAT
READY
UNIVERSALSERIALBUS