Filter
Top Products
SB-POL-RNGR700 INSTR_SKU# 011295
Page 3 • JL Audio, Inc 2009
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.
JLA-SKU#011295 ©9-15-2009 • Printed in USA • ©2008 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902 #6,243,479
#6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending.
For more detailed information please visit us online at www.jlaudio.com.
(954) 443-1100
www.jlaudio.com
1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A
I N C L U D E D H A R D W A R E
2) Custom Steel Bracket 2) 3/8-16 x 2 3/4” Hex Head Bolt
1) 3/8-16x 1” Hex Head Bolt 1) 3/8 x 1 1/4” Fender Washer
3) 3/8 Split Locking Washer 4) 5/16 SS Black Washer
2) 5/16-18 x 3/4” Steel Black Cap Screw 4) 5/16 Steel Split Lock Washer
1) 5/16-18 x 3-1/2” Steel Cap Screw 3) 5/16-18 Steel Hex Nut
S P E C I F I C A T I O N S
Subwoofer Enclosure Type: Acoustic Suspension (sealed)
Driver Type: M10W5
Nominal Impedance: 4 Ohms
Continuous Power Handling: 250 Watts (RMS)
P O W E R R E C O M M E N D A T I O N
JL Audio recommends using a high quality amplifier such as the JL Audio M4500. The diagram below shows the
recommended crossover and input settings for the M4500 when being used to power your Stealthbox
®
and a pair
of mids and highs such as the speakers suggested below.
The JL Audio M4500 is a very versatile audio component. Please consult the owner’s manual for even more
detailed information about installing and tuning this amplifier.
C O N N E C T I O N S
Using quality power, signal and speaker wire is essential in ensuring the performance of your Stealthbox®.
JL Audio recommends using a 4 AWG power kit such as the XC-PCS4-1B for your Stealthbox® amplifier, other
kits are available should you be using more than one amplifier. Signal wire such as the JL Audio Premium
Audio Interconnect Cables should be used that will provide signal for both channels of the amplifier. JL Audio
reccommends using 12AWG speaker wire for subwoofers such as our XC-BCS12-25.
M I D / H I G H F R E Q U E N C Y D R I V E R F I T M E N T
A variety of JL Audio coaxial and component systems will fit in the various speaker locations available, we suggest
using either our MX-650, M-650, M-770 or M-770x speakers to compliment your new Stealthbox®.