JL Audio SB-D-DRNGO/10W1v2/GA Car Speaker User Manual


 
Specifications:
Enclosure Type: Acoustical Suspension (sealed)
Driver Type: 10WØ
Nominal Impedance: 4
Cont. Power Handling: 125Watts
JL Audio recommends using a high quality amplifier such as the JL Audio e2150. The diagram below shows the recommended
crossover, infrasonic filter and equalizer settings for the e2150 when being used to power your Stealthbox®.
Included Hardware:
(4) 1/4" x 2" Bolts
(4) 1/4" Washers
(4) #8 Flat Head Screws
(4) 1/4" Lock Washers
(1) Console Insert
10369 N. Commerce Pkwy, Miramar, Florida 33025-392 Phone: 954.443.1100 Fax: 954.443.1111
The JL Audio e2150 is a very versatile audio component. Please consult the owner’s manual for detailed information
about installing and tuning this amplifier.
➔➔➔
STEP 13:
Attach the plastic clips on the
Stealthbox upholstery to the bars under the
seat structure.
Do not overstretch the upholstery
STEP 14:
Run speaker wire from the amplifi-
er to the Stealthbox mounting location. Be
sure the wires are routed in such a way that
they will not be pinched when the seat is rein-
stalled.
STEP 15: Place the seat back in the vehicle
and connect the speaker wires to the
Stealthbox.
STEP 16: Bolt the seat in place in the
reverse order that it was removed.
SB-D-DRNGO/10WØ, JL AUDIO, Inc 2004
Sheet SKU#011103 Revision 6/28/2004Page 3
www.jlaudio.com
Mid/High Frequency Driver Information:
CONGRATULATIONS!
INSTALL COMPLETE.
VR650-CSI
TR525-CXI
Front Location Driver Size:
6.5”
Applicable JL Audio Products:
TR,VR,XR,ZR 650-CSI
Rear Location Driver Size :
5.25”
Applicable JL Audio Products:
TR,VR,XR 650-CXI
Cont.
From
Previous
Page
Difficulty Of Installation: