Filter
Top Products
Sheet SKU#011142 Revision 8/15/00
SB-GM-SLVCNSL/10W3-D6, JL AUDIO, Inc 2000 • Page 2
STEP 4: Remove the additional mounting screws at the bottom of
the storage tray.
STEP 5: Remove the screws around the upper edge of the
storage tray.
STEP 6: Open the door at the rear of the console to its maximum
extension.
STEP 7: Remove the two screws at the hinge point.
STEP 8: Remove the cup holder.
STEP 9: Remove the two screws as shown in the picture to the
right. These screws secure the internal storage tray from the rear.