JL Audio SB-GM-SLVCTR2/10W3v3/GA2 Car Speaker User Manual


  Open as PDF
of 3
 
Continued on Next Page
SB-GM-SLVCTR2/10W3v3_INSTR_SKU#011248
SB-GM-SLVCTR2/10W3v3_INSTR_SKU#011248
STEP 7
Remove the plastic tray from vehicle.
STEP 6
Grab a hold of the bottom cushion and pull forward.
Remove the bottom cushion from the vehicle.
STEP 5
From the passenger’s side of the vehicle, look to the side of
the center seat back / storage bin.
Use an hex key to remove the black bolt that secures the
gray bracket to the center seat back / storage bin.
STEP 4
From the driver’s side of the vehicle, look to the side of the
center seat back / storage bin.
Use an hex key to remove the black bolt that secures the
gray bracket to the center seat back / storage bin.
Page 2 • JL Audio, Inc 2007
STEP 9
Remove the four front nuts that secure the seating to the
floor.
STEP 11
Slide the rear of the Stealthbox® into the mounting area first,
then drop the front of the Stealthbox® into place.
STEP 10
Run speaker wire from the amplifier location to the
Stealthbox® location.
STEP 8
Remove the four rear bolts that secure the seating to the
floor.
 previous