JL Audio SB-H-S2000/10W3v3 Car Speaker User Manual


  Open as PDF
of 3
 
Sheet SKU#011155 Revision 10/5/01
SB-H-S2000/10W3, JL AUDIO, Inc 2001 • Page 2
STEP 5: Locate holes from inside the trunk. Using a carpet
knife, cut holes into the carpet.
STEP 6: Connect the speaker wire and place the Stealthbox in
the well, making sure that no speaker wire is trapped under the
enclosure. Test the enclosure at this point.
STEP 7: From underneath the car, insert two 3/8" bolt, lock
washer, fender washer through the hole in the sheet metal into
the threaded insert molded into the Stealthbox. Before tighting
place a generous bead of silicone sealant between the fender
washer and the sheet metal of the car, to prevent moisture from
entering trunk.
3/8" Bolt
Lock Washer
Flat Washer
Vehicle's Sheet M
e
Enclosure Wall (fiberglass)
Threaded Insert
Molded into
Enclosure
Bead of Silicone Sealant
 previous