Filter
Top Products
Stealthbox SB-T-TUNCNSL/10W3 Stealthbox 2001 Sheet SKU# 011150 Revision 01/23/01
STEP 7: Flip the console and Stealthbox upside down.
Using the existing holes on each side of the console as
guides, drill 7/64” pilot holes into the Stealthbox.
STEP 8: Secure the console shell to the Stealthbox using
the four supplied black pan-head screws. The console is
now ready to be installed into the vehicle.
STEP 9: Using a 3/8” drill bit, drill out the two front
factory console mounting holes.
CAUTION: Check under the vehicle for any loose brake
lines, fuel lines or other hazards before drilling.
Always wear eye protection when drilling.
STEP 10: Cut the factory carpet located between the
factory console mounting holes down the middle.
Picture #4
Picture #5
Picture #6
Picture #7