Filter
Top Products
SB-T-TUNDC/8W7_INSTR_SKU#011247
SB-T-TUNDC/8W7_INSTR_SKU#011247
CONGRATULATIONS
You have completed the installation for this model!
Please refer to the Power Recommendation section for an
amplifier recommendation and basic set-up help.
STEP 13
Lower the rear seat and replace any removed contents.
STEP 12
Using the factory bolt that was removed in STEP 4, secure
the L-bracket and the seat belts’ mount to the floor.
Page 3 • JL Audio, Inc 2007
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.
JLA-SKU#011247 -09-11-200
JLA-SKU#011247 -09-11-200
7
7 • Printed in USA • ©2007 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902
#6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign
patents pending. For more detailed information please visit us online at www.jlaudio.com.
(954) 443-1100
www.jlaudio.com
10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA
INCLUDED HARDWARE
(2)
(2)
3/8-inch -16 x 1-inch Hex Bolt
3/8-inch -16 x 1-inch Hex Bolt
(2)
(2)
3/8-inch Split Lock Washer
3/8-inch Split Lock Washer
(2)
(2)
3/8-inch Flat Washer
3/8-inch Flat Washer
(2)
(2)
L-Bracket
L-Bracket
SPECIFICATIONS
Enclosure Type:
Bass Reflex (ported)
Bass Reflex (ported)
Driver Type:
8W7
8W7
Nominal Impedance:
3 ohms mono
3 ohms mono
Continuous Power Handling:
300 Watts
300 Watts
P O W E R R E C O M M E N D A T I O N
POWER RECOMMENDATION
JL Audio recommends using a high quality amplifier such as the JL Audio 250/1v2.
The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the 250/1v2
when being used to power your Stealthbox
®
.
The JL Audio 250/1v2 is a very versatile audio component. Please consult the owner’s manual for even more
detailed information about installing and tuning this amplifier.
MID/HIGH FREQUENCY DRIVER FITMENT
A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.
Front Speaker Size / Location:
6-inch x 9-inch / Front Doors
6-inch x 9-inch / Front Doors
Fits JL Audio Models**: *
TR690-TXi & *VR690-CXi
TR690-TXi & *VR690-CXi
Rear Speaker Size / Location:
6.5-inch / Rear Doors
6.5-inch / Rear Doors
Fits JL Audio Models:
*TR650-CXi, *TR650-CSi, *VR650-CXi, *VR650-CSi, *XR650-CXi, XR650-CSi,
*TR650-CXi, *TR650-CSi, *VR650-CXi, *VR650-CSi, *XR650-CXi, XR650-CSi,
*C5-650x, *C5-650 & *ZR650-CSi
*C5-650x, *C5-650 & *ZR650-CSi
*Spacer ring is required for proper mounting.
*Spacer ring is required for proper mounting.
**Other size speakers may be used, custom mounting ring is required.
**Other size speakers may be used, custom mounting ring is required.