Filter
Top Products
13
ENGLISH
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Ex.: When “TRE” is selected
2
Indication pattern changes as
you adjust the level.
Indication To do: Range
BAS*
1
(bass)
Adjust the bass. –06 (min.)
to
+06 (max.)
TRE*
1
(treble)
Adjust the treble. –06 (min.)
to
+06 (max.)
FAD*
2
(fader)
Adjust the front
and rear speaker
balance.
R06 (Rear
only)
to
F06 (Front
only)
BAL
(balance)
Adjust the left
and right speaker
balance.
L06 (Left
only)
to
R06 (Right
only)
LOUD*
1
(loudness)
Boost low and
high frequencies
to produce a well-
balanced sound at
low volume level.
LOUD ON
J
LOUD OFF
VOL*
3
(volume)
Adjust the
volume.
00 (min.) to
30 or 50
(max.)*
4
*
1
When you adjust the bass, treble, or
loudness, the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including “USER.”
*
2
If you are using a two-speaker system, set the
fader level to “00.”
*
3
Normally the +/– buttons work as the volume
control. So you do not have to select “VOL”
to adjust the volume level.
*
4
Depending on the amplifier gain control
setting. (See page 14 for details.)
EN10-13_KD-G110[J]f.indd 13 10/13/04, 1:16:09 PM