Filter
Top Products
10
ENGLISH
2
Adjust the level.
To increase the level.
To decrease the level.
Note:
Normally, the +/– buttons works as the volume control.
So you do not have to select “VOL” to adjust the volume
level.
SOUND ADJUSTMENTS
Turning on/off the loudness
function
The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these frequencies
to produce a well-balanced sound at low volume
levels.
Each time you press LOUD, the loudness function
turns on/off alternatively.
LOUD
J
Selecting preset sound modes
You can select a preset sound adjustment suitable
to the music genre.
Each time you press SOUND, the sound mode
changes as follows.
SOUND
SCM OFF
(SOFT)(POP)(BEAT)
Note:
• You can adjust the preset sound mode to your
preference, and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments” on
page 11.
• To adjust only the bass and treble reinforcement levels
to your preference, see “Adjusting the sound” on page
10.
• When one of the sound modes is selected, it is shown
on the display as follows:
For example, when “POP” is selected.
Indication For: Preset values
BAS TRE LOUD
SCM OFF (Flat sound) 00 00 On
BEAT Rock or +2 00 On
disco music
POP Light music +4 +1 Off
SOFT Quiet
background +1 –3 Off
music
Indication To do: Range
BAS Adjust the bass. –6 (min.)
(Bass) |
+6 (max.)
TRE Adjust the treble. –6 (min.)
(Treble) |
+6 (max.)
FAD* Adjust the front R6 (Rear only)
(Fader) and rear speaker |
balance. F6 (Front only)
BAL Adjust the left L6 (Left only)
(Balance) and right speaker |
balance. R6 (Right only)
VOL Adjust the volume. 00 (min.)
(Volume) |
50 (max.)
* If you are using a two-speaker system, set the fader
level to “00.”
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the
button, the adjustable items
change as follows:
VOL
(volume)
BAS
(bass)
TRE
(treble)
FAD
(fader)
BAL
(balance)
EN09-11 KS-F161[U] 10/30/01, 9:53 AM10