Filter
Top Products
DT-X91C
Front view
PHONE: Earphone jack, for HDMI embedded audio and analog audio monitoring
POWER: Power on/off
Connect with power cable, press the “POWER” and the power indicator is turned on and after 10
seconds, the monitor will be switched on and get into normal working status. Press the “POWER”
again, the indicator is turned off and monitor is switched off.
Disconnect with power cable or battery if the monitor will not be used for a period of time.
CVBS: Press to switch the input signal to Composite video
HDMI: Press to switch the input signal to HDMI
B/W: Black and White mode
SCAN: Overscan / Underscan switch
MENU: Press to enter Menu
F1: User definable function key 1
F2: User definable function key 2
RATIO: 16:9 and 4:3 switch
ZOOM: Picture Zoom-in
Press “ZOOM” to switch ZOOM1: Canon DSLR scale zoom-in, and ZOOM2: pixel to pixel zoom-in.
DISPLAY: Display current settings
Press “Display” to display safety mark, title and the current input signal information
ENTER: Select and Apply
Under menu system, revolve “ENTER” to adjust settings and press to apply;
and out of menu system, directly revolve “ENTER” to adjust volume.
TALLY Light: Red, Green and Yellow 3-color TALLY indicator
Speaker: Output HDMI and Analog audio