JVC FX640R Car Stereo System User Manual


 
16
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically ejects from the cassette compartment.
If you change the source to FM/AM (or CD for KS-FX740R/FX640R), the tape play also stops
(without ejecting the cassette this time).
You can also eject the tape with the unit turned off.
Select the tape direction.
Each time you press the button, the tape direction changes
alternately – forward (
) and reverse ( ).
TAPE OPERATIONS
Listening to a tape
1
2
To play back tapes recorded with the Dolby NR
(ONLY FOR KS-FX740R)
Press the MO/RND/ button to set the Dolby B NR* system as required in step 2
above.The
mark appears on the display. To cancel the Dolby B NR, press the same
button again.
* Dolby noise reduction manufactured under license from Dolby Laboratories Licensing
Corporation.
“DOLBY” and the double-D symbol
are trademarks of Dolby Laboratories Licensing
Corporation.
Insert a cassette.
The unit turns on and tape play starts automatically.
When one side of the tape reaches its end during play, the
other side of the tape automatically starts playing. (Auto
Reverse)
Note on One-Touch Operation:
When a cassette is already in the cassette compartment, pressing TAPE 2 3 turns on the
unit and starts tape play automatically.
TAPE
2
1
MO/RND/
(ONLY FOR KS-FX740R)
EN.16-18KS-FX740R/640/540R[E]/F 98.11.6, 3:39 PM16