JVC GET0070-001A Car Stereo System User Manual


 
27
ENGLISH
To set the Custom Equalizer Link– CEQ LINK
A different sound mode can be stored in memory
for each source so that you can change the sound
modes simply by changing the sources.
When shipped from the factory, this mode is
deactivated.
• LINK ON: Different sound modes for different
sources.
LINK OFF: One sound mode for all sources.
To set the clock display – CLOCK
You can set the clock to be shown on the display
when the unit is turned on.
When shipped from the factory, the clock is set to
be shown on the display.
ON: Clock display is turned on.
OFF: Clock display is turned off. When
“OFF” is selected, the current
source name or station band
appears instead of the clock display
(except when “LINE IN” is selected
as the source).
To select the level meter – LEVEL
You can select the level display according to your
preference.
When shipped from the factory, “AUDIO 2” is
selected.
• AUDIO 1:
Level meter illuminates from bottom
to top.
• AUDIO 2:
Alternates level meter (moves from
bottom to top) and illumination
display.
OFF:
Erases the audio level meter.
To select the dimmer mode – DIMMER
When you turn on the car head lights, the display
automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer
mode is activated.
AUTO: Activates Auto Dimmer.
OFF: Cancels Auto Dimmer.
ON: Always dims the display.
Note:
Auto Dimmer equipped with this unit may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF.”
To select the telephone muting – TEL
This mode is used when a cellular phone system is
connected. Depending on the phone system used,
select either “MUTING 1” or “MUTING 2,” whichever
mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.
MUTING 1: Select this if this setting can mute
the sounds.
MUTING 2: Select this if this setting can mute
the sounds.
OFF: Cancels the telephone muting.
To turn on/off the key-touch tone – BEEP
You can deactivate the key-touch tone if you do not
want it to beep each time you press a button. When
shipped from the factory, the key-touch tone is
activated.
ON: Activates the key-touch tone.
OFF: Deactivates the key-touch tone.
To select the external component to use
EXT IN
You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select which
component – CD changer or external component
– to use.
When shipped from the factory, CD changer is
selected as the external component.
LINE IN: To use the external component other
than CD changer.
CHANGER: To use the CD changer.
Note:
For connecting the Line Input Adaptor KS-U57 and the
external component, refer to the Installation/Connection
Manual (separate volume).
EN25_28KSFX925R[EE]f.pm5 4/03/2002, 10:40 AM27