Filter
Top Products
17
ENGLISH
To change the display information
While playing back an MP3 file, you
can change the file information
shown on the display.
Each time you press DISP (display),
the display changes to show the
following:
• When “TAG DISP” is set to “TAG ON”
(initial setting: see page 27)
* If an MP3 file does not have ID3 tags,
directory name and file name appear.
• When “TAG DISP” is set to “TAG OFF”
To skip to the next or previous files
Locating a file or particular
portion on an MP3 disc
To fast-forward or reverse the file
Note:
During this operation, you can only hear intermittent
sounds. (The elapsed playing time also changes
intermittently on the display.)
Press and hold 4
while playing an MP3 disc,
to reverse the file.
Press and hold ¢
while playing an MP3 disc,
to fast-forward the file.
Press ¢ briefly while
playing, to skip ahead to the
beginning of the next file.
Each time you press the
button consecutively, the
beginning of the next file is
located and played back.
(See “MP3 playback/search
order” on page 15.)
Press 4 briefly, while
playing, to skip back to the
beginning of the current file.
Each time you press the
button consecutively, the
beginning of the previous
files is located and played
back. (See “MP3 playback/
search order” on page 15.)
To stop play and eject the disc
Press 0.
CD play stops, the control panel opens, then the
CD automatically ejects from the loading slot.
If you change the source, the CD play also stops
(without ejecting the disc this time).
Directory name
File name
Elapsed playing time
(with track No.)
Album name/performer (directory name*)
Elapsed playing time (with track No.)
Track title (file name*)
Note:
The display shows up to 8 characters at one time and
scrolls if there are more than 8 characters.
See also “To select the scroll mode – SCROLL” on
page 26.
EN14-20.KD-SX980[J]f.pm5 7/1/02, 5:26 PM17