Filter
Top Products
42
ENGLISH
EXTERNAL COMPONENT OPERATIONS
Playing an external component
You can connect two external components to this
unit.
Connect one to the CD changer jack on the rear
using the Line Input Adapter KS-U57 (not
supplied), and the other to the AUX input jack on
the control panel.
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. (See “To select the external component to
use—EXT IN” on page 34.)
• If the input level of the external component
connected to the AUX input jack is not high enough,
increase the input level properly. (See “To adjust the
auxiliary input level—AUX ADJ” on page 34.)
1
Select the external component
(LINE IN or AUX IN).
To select “LINE IN” (component
connected to the CD changer jack on the
rear), press CD CD-CH (AUX) repeatedly.
• If “LINE IN”* does not appear on the
display, see page 34 and select the external
input (“LINE IN”).
* Displayed only when one of the following
sources is selected—FM, AM, and CD.
To select “AUX IN” (component connected
to the AUX input jack on the control panel),
press and hold CD CD-CH (AUX).
Note on One-Touch Operation:
When you press CD CD-CH (AUX), the power
automatically comes on. You do not have to press
to turn on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics you
want. (See pages 30 and 31.)
Auxiliary input*
Portable MD player, etc.
* Not compatible with
digital signals.
CD LINE IN*
EN42-42_KD-SX947R[EE]f.p65 1/10/03, 9:54 PM42