Filter
Top Products
25
ENGLISH
To set the changer display—CH DISP
This mode is used to check the display
information of the CD changer.
When shipped from the factory, “DISC” is
selected.
• DISC: Disc number and track number
appear.
• TIME: Elapsed playing time and track
number appear.
To select the level meter—LEVEL
You can select the level meter display according
to your preference.
When shipped from the factory, “AUDIO 2” is
selected.
• AUDIO 1: Shows the audio level indicator.
• AUDIO 2: Alternates “AUDIO 1” setting and
illumination display.
• OFF: Erases the audio level indicator.
To select the telephone muting—TEL
This mode is used when a cellular phone system
is connected. Depending on the phone system
used, select either “MUTING 1” or “MUTING 2”
whichever mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.
• MUTING 1: Selects this if this setting can
mute the sounds while using the
cellular phone.
• MUTING 2: Selects this if this setting can
mute the sounds while using the
cellular phone.
• OFF: Cancels the telephone muting.
To select the external component to use
—EXT IN
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select
which component—CD changer or external
component—to use.
When shipped from the factory, CD changer is
selected as the external component.
• CHANGER: To use the CD changer.
• LINE IN: To use the external component
other than CD changer.
Note:
For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
EN23-26KS-FX842R[E_EX]f.p65 3/7/03, 6:10 PM25