Filter
Top Products
10
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching for a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
Each time you press the button, the band
changes as follows:
* When “CLOCK DISP” is set to “CLK DISP
ON” (see page 36), the current indication will
soon change to the clock time.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
Selected band appears*.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
2
Start searching for a station.
When a station is received, searching stops.
To stop searching before a station is
received, press the same button you have
pressed for searching.
Searching for a station manually:
Manual search
1
Select the band (FM1 – 3, AM).
Each time you press the button, the band
changes as follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
To search for stations of
higher frequencies
To search for stations of lower frequencies
FM 1
(F1)
FM 2
(F2)
FM 3
(F3)
A M
(A1)
FM 1
(F1)
FM 2
(F2)
FM 3
(F3)
A M
(A1)
(For KD-G801) (For KD-G701)
or
(For KD-G801) (For KD-G701)
or
EN10-13_G801_G701[E_EX]f.p65 1/6/04, 12:07 PM10