Filter
Top Products
14
ENGLISH
Selecting preset sound modes
You can select a preset sound adjustment
suitable to the music genre.
Select the sound mode you want.
Each time you press the button,
the sound mode changes as
follows:
Indication For: Preset values
BAS TRE LOUD
SCM OFF (Flat sound) 00 00 OFF
BEAT Rock or +02 00 ON
disco music
SOFT Quiet +01 –03 OFF
background
music
POP Light music +04 +01 OFF
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments”
below.
• To adjust the bass and treble reinforcement levels or
to turn on/off the loudness function, see page 13.
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step
1
again.
Ex.: When you select “BEAT”
1
Call up the sound mode you want to
adjust.
• See left column for details.
2
To adjust the bass or treble level
1 Select “BAS” (bass) or “TRE” (treble).
2 Adjust the level.
To turn on or off the loudness
function
• See page 13 for details.
3
Repeat step
2
to adjust the other
items.
4
Press and hold SCM until the sound
mode you have selected in step
1
flashes on the display.
Your adjustment made for
the selected sound mode is
stored in memory.
5
Repeat the same procedure to store
other sound modes.
To reset to the factory settings, repeat the
same procedure and reassign the preset values
listed in the table on the left column.
BEAT
SOFT
POP
SCM OFF
EN13-14KS-FX555[UN]f.p65 5/12/04, 1:01 PM14