Filter
Top Products
19ENGLISH
Warning messages
Connection Error
The device is registered but the connection
has failed. Use <Connect Phone / Connect
Audio> to connect the device again.
( 15)
Error
Try the operation again. If “Error” appears
again, check if the device supports the
function you have tried.
Please Wait...
The unit is preparing to use the Bluetooth
function. If the message does not disappear,
turn off and turn on the unit, then connect
the device again (or reset the unit).
Please Reset...
Reset the unit and try the operation again. If
“Please Reset...” appears again, consult your
nearest JVC car audio dealers.
Changing the Bluetooth
settings
1
2
] <Bluetooth> ] <Setting>
3
]
Select a setting item, then repeat
the procedure to change the setting
accordingly.
• To return to the previous menu, press
BACK
.
• To exit from the menu, press
DISP
or
MENU
.
Selecting the playback modes
• For Bluetooth devices that support AVRCP 1.3.
1
2
]
“Repeat”
j
“Random”
3
Repeat
Track
All
Group
: Repeats current track
: Repeats all tracks
: Repeats all track of current
group
Random
All
Group
: Randomly plays all tracks
: Randomly plays all track of
current group
To cancel repeat play or random play, select
“Off.”
• To return to the previous menu, press
BACK
.
Bluetooth Information:
If you wish to receive more information
about Bluetooth, visit the following JVC web
site: <http://www.jvc.co.jp/english/car/>
(English website only)
[Hold]
[Hold]
EN10-21_KD-A815[J]f.indd 19EN10-21_KD-A815[J]f.indd 19 12/29/09 4:05:49 PM12/29/09 4:05:49 PM