Filter
Top Products
43
ENGLISH
Vol Adjust (volume adjust)
Adjust and store the volume level of each source
except FM.
Once you have made an adjustment, it
is memorized, and the volume level will
automatically increase or decrease by adjusted
level when you change the source.
Adjust to match the input level to the FM sound
level.
• –12 (min) to +12 (max.)
HPF (High pass filter)
Adjust the cut-off frequency to the front/rear
speakers according to the subwoofer setting.
• 55 Hz: Cuts off frequencies lower than 55 Hz.
• 85 Hz: Cuts off frequencies lower than 85 Hz.
• 125 Hz: Cuts off frequencies lower than
125 Hz.
• Through: Cuts off no frequencies.
See the article below for the subwoofer setting.
Sub Woofer
Adjust the settings below in the SetUp submenu.
• Volume: Subwoofer output level
• Freq.: Subwoofer cut-off frequency
• Phase: Subwoofer phase. Select which
reproduces a better sound from “Normal” and
“Reverse”.
OK
AVX1EN_book.indb 43AVX1EN_book.indb 43 05.2.23 11:48:36 PM05.2.23 11:48:36 PM