Filter
Top Products
15
ENGLISH
Adjusting the sound balance
1
2
Indication [Range]
FAD*
1,
*
2
(fader)
Adjust the front and rear speaker balance.
[R06 to F06]
BAL*
2
(balance)
Adjust the left and right speaker balance.
[L06 to R06]
SUB.W*
3
(subwoofer)
Adjust the subwoofer output level. [00 to 08]
VOL (volume)
Adjust the volume. [00 to 30 or 50*
4
]
*
1
If you are using a two-speaker system, set the
fader level to “00.”
*
2
This adjustment cannot affect the subwoofer
output.
*
3
This takes effect only when a subwoofer is
connected.
*
4
Depending on the amplifier gain control
setting. (See page 18 for details.)
To be continued...
Using SRS Circle Surround Auto
TM
(CS-A mode)
SRS Circle Surround Auto
TM
is a surround
technology specially aimed for car audio, and
it can reproduce 5.1-channel sound system
through conventional 4-door mounted speaker
system (with or without subwoofer.)
SRS Circle Surround Auto
TM
is made of...
SRS Circle Surround II
TM
decoder:
Converts the sound of CD, AM/FM radio
broadcast and other various source into multi-
channel sounds.
SRS FOCUS®:
Elevates the sound field to a more optimal
listening level.
SRS TruBass®:
Creates an ultra rich bass using the standard
speakers with no subwoofer connected.
To select a preset mode of SRS Circle Surround
Auto
TM
TYPE A : For the system of large front
speaker with tweeter and rear
tray speaker.
TYPE B : For the system of large front
speaker with tweeter and door-
mounted rear speaker.
TYPE C : For the system of small front
speaker and door-mounted
rear speaker.
USER : For your preference.
OFF : Cancels CS-A mode.
TYPE A
TYPE B
OFF
USER
TYPE C
EN_KD-HDR1[J].indb 15EN_KD-HDR1[J].indb 15 06.1.23 10:07:09 AM06.1.23 10:07:09 AM