Filter
Top Products
25
ENGLISH
• Positive: Positive (normal) pattern of the
display.
• Negative: Negative pattern of the display.
To select the font on the display—Font Type
You can change the font types used on the display.
Select either “1” or “2” according to your preference.
To change the FM tuner selectivity
—IF Filter
In some areas, adjacent stations may interfere with
each other. If this interference occurs, noise may
be heard.
• Auto: When this type of interference occurs,
this unit automatically increases the
tuner selectivity so that interference
noise will be reduced. (But the stereo
effect will also be lost.)
• Wide: Subject to the interference from
adjacent stations, but sound quality will
not be degraded and the stereo effect
will not be lost.
To turn on/off the key-touch tone—Beep
You can deactivate the key-touch tone if you do not
want it to beep each time you press a button.
• On: Activates the key-touch tone.
• Off: Deactivates the key-touch tone.
To select the external component to use
—Ext Input
You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
To use the external component as the playback source
through this unit, you need to select which
component—CD changer or external component
—to use.
• Changer: To use the CD changer.
• Line In: To use the external component other
than CD changer.
Note:
For connecting the Line Input Adaptor KS-U57 and the
external component, refer to the Installation/Connection
Manual (separate volume).
To select the telephone muting—Telephone
This mode is used to cellular phone system is
connected. Depending on the phone system used,
select either “Muting 1” or “Muting 2,” whichever
mutes the sounds from this unit. When shipped
from the factory, this mode is deactivated.
• Muting 1: Select this if this setting can
mute the sounds.
• Muting 2: Select this if this setting can
mute the sounds.
• Off: Cancels the telephone muting.
To set the movie demo—MovieDemo
When shipped from the factory, the movie demo
has been activated (“Interval” is selected).
• Interval: If no operatoin is done for about 20
seconds, the movie demo and
playback source indication
alternately appears on the display.
• All Time: If no operation is done for about 20
seconds, the movie demo
automatically starts.
• Off: Cancels the movie demo.
To set the source animation on the display
—SRC Anime
When changing the source, the display shows the
source animation. If you do not want this animation
you can turn it off.
• On: The source animation appears just
after you change the source.
• Off: Cancels the source animation.
To select the scroll mode—Scroll
You can scroll the disc information if it cannot be
displayed at a time.
• Once: Scrolls only once.
• Auto: Repeats the scroll
(in 5-second intervals).
• Off: Cancels Auto Scroll.
To select the dimmer mode—Dimmer
When you turn on the car head lights, the display
automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer
mode is activated.
• Auto: Activates Auto Dimmer.
• Off: Cancels Auto Dimmer.
• On: Always dims the display.
Note:
Auto Dimmer equipped for this unit may not work
correctly on some vehicles, particularly on those having
a control dial for dimming.
In this case, set the dimmer mode to “On” or “Off.”
To adjust the display contrast level—Contrast
You can adjust the display contrast level among 1
(dark) to 10 (bright).
To select the display illumination pattern
—LCD Type
You can select the display illumination patterns
according to your preference.
• Auto: Positive pattern will be selected
during the day time (while the
headlights are turned off); on the
other hand, negative pattern will be
used during the night time (while
the headlights are turned on.)