Filter
Top Products
33
ENGLISH
7
Enter the color selecting mode.
8
Select the display color.
As you turn the control dial, the colors
change as follows:
Every*
1
O Aqua O Sky O Sea O
Leaves O Grass O Rose O Cherry O
Orange O Honey O Violet O Grape O
Snow O User
*
2
O (back to the beginning)
*
1
When you select “Every,” the color changes
every two seconds (changing to every color
listed above except “User.”)
*
2
When you select “User,” one of the original
colors—“Day” or “Night” can be selected
depending on the “User” setting.
9
Repeat steps 5 to 8 to select the color
for each source (except when
selecting “AllSource” in step 6).
10
Finish the setting.
4
Select “Source” as the “Mode” (color
mode) setting.
As you turn the
control dial, the
“Mode” settings
change as follows:
5
Enter the source selecting mode.
6
Select the source that you want to set
the display color for.
As you turn the control dial, the source
names change as follows:
*
1
When you select “AllSource,” you can use the
same color for all sources.
*
2
Selected only when these components are
connected.
Currently selected setting for “Source”
*
2
AllSource CD
Changer
(Line In)
AM
FM
*
1
*
2
Source User
EN29-36LH2000[J]f.pm5 4/9/02, 9:41 AM33