Filter
Top Products
6
ENGLISH
2
1-
2
1-
1
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual searching to tune into a particular station.
Searching a station automatically: Auto search
1
Select the band.
1 Press FUNC to select the tuner as the source.
2 Press BAND to select the band (FM1, FM2, FM3 or AM).
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen
to an FM broadcast.
2
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in FM stations only with strong signals
This function works only while searching FM stations, including SSM preset (see page 8).
1 Press MODE.
“MODE” appears on the lower part of the display, and the number buttons can work as
different function buttons.
2 Press LO (Local), while “MODE” is still on the display, so that the LOCAL indicator lights up
on the display.
Each time you press the button, the LOCAL indicator lights up and goes off alternately.
LO MODE
To search stations of
higher frequencies
To search stations of
lower frequencies
1
2
Level meter (see page 25)Selected band (then clock time:
see page 25) appears.
EN06-10.KD-LX3[J]/f 99.3.9, 10:08 AM6