JVC KD-SX980 Car Stereo System User Manual


 
22
ENGLISH
Indication For: Preset values
BAS TRE LOUD
USER (Flat sound) 00 00 OFF
ROCK Rock or +03 +01 ON
disco music
CLASSIC Classical +01 –02 OFF
music
POPS Light music +04 +01 OFF
HIP HOP Funk or Rap +02 00 ON
music
JAZZ Jazz music +02 +03 OFF
JAZZ POPS
USER ROCK CLASSIC
HIP HOP
Ex.: If you have selected “USER” previously
Selecting preset sound modes
(C-EQ: custom equalizer)
You can select a preset sound mode (C-EQ:
Custom Equalizer) suitable to the music genre.
1
Press EQ.
The last selected sound mode is
recalled and applied to the
current sound.
2
Select the sound mode you want.
Each time you press the button,
the sound modes change as
follows:
Sound mode indicator flashes.
Note:
You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments” on
page 23.
To store a sound mode separately for
each playback source (C-EQ Link)
You can select a sound mode and store it in
memory. It will be recalled every time you select
the same source and will be shown on the display.
A sound mode can be stored for each of the
following sources — FM1, FM2, FM3, AM, CD and
external components.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items
appears on the display.
2 Press ¢ or 4 to select “CEQ LINK
(custom equalizer link).”
3 Turn the control dial clockwise to select “LINK
ON.”
4 Press SEL (select) to finish the setting.
To cancel C-EQ Link, repeat the same
procedure and select “LINK OFF” in step 3.
Note:
When you change the “CEQ LINK” setting, sound
mode (C-EQ) is automatically reset to USER.
Sound mode indicator flashes
Ex.: When you have selected “ROCK”
EN21-23.KD-SX980[J]f.pm5 8/1/02, 10:23 PM22