Filter
Top Products
24
ENGLISH
Satellite radio operations
This unit is Satellite (SAT) Radio Ready–
compatible with both SIRIUS Satellite radio
and XM Satellite radio.
Before operating your satellite radio:
• For connection, see Installation/
Connection Manual (separate volume).
• Refer also to the Instructions supplied
with your SIRIUS Satellite radio or XM
Satellite radio.
• “SIRIUS” and the SIRIUS dog logo are
registered trademarks of SIRIUS Satellite
Radio Inc.
• XM and its corresponding logos are
registered trademarks of XM Satellite
Radio Inc.
• “SAT Radio,” the SAT Radio logo and all
related marks are trademarks of SIRIUS
Satellite Radio Inc., and XM Satellite
Radio, Inc.
Activate your SIRIUS subscription after
connection:
1
2
JVC DLP starts updating all the SIRIUS
channels.
Once completed, JVC DLP tunes in to the
preset channel, CH184.
3
Check your SIRIUS ID, see page 21.
4 Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you
can call SIRIUS toll-free at
1-888-539-SIRIUS (7474).
“SUB UPDT PRESS ANY KEY” scrolls
on the display once subscription has been
completed.
Activate your XM subscription after
connection:
• Only Channel 0, 1, and 247 are available
before activation.
1
Listening to the satellite radio
Connect either one of the following (separately
purchased) to the CD changer jack on the rear
of this unit.
• JVC SIRIUS radio DLP—Down Link
Processor, for listening to the SIRIUS
Satellite radio.
• XMDirect™ Universal Tuner Box
using a JVC Smart Digital Adapter—
XMDJVC100 (not supplied), for listening to
the XM Satellite radio.
GCI (Global Control Information) update:
• If channels are updated after subscription,
updating starts automatically.
“UPDATING” flashes and no sound can be
heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your
satellite radio.
EN18-27_KW-XC400[J]f.indd 24EN18-27_KW-XC400[J]f.indd 24 10/19/05 6:41:53 PM10/19/05 6:41:53 PM