JVC KD-A645 Car Stereo System User Manual


 
15
STEERING
WHEEL
REMOTE
KD-A645 / KD-R640 KD-R540 / KD-R440
Car fuse block
Ignition switch
Recommended
connection
Light blue/yellow
KD-A645
only
Vehicle-specific Wiring Harness
(separately purchased)
For more information:
Metra Electronics:
www.metraonline.com
Scosche Industries:
www.scosche.com
Blue/white: To amplifier
Blue: To power antenna
Make this connection if
your vehicle factory wiring
harness does not have “12 V
ignition switch” wire.
Separate red wire
Wiring connection
Signal cord (not supplied)
Remote wire
(not supplied)
Rear ground terminal
To the steering wheel
remote control adapter
Fuse (10 A)
Antenna terminal
Front output
Rear/subwoofer output Rear/subwoofer output
JVC Amplifier
Factory wiring harness
(vehicle)
Vehicle dashboard
(
8)
Part list for installation
( ×2 )
( ×1 )
( ×1 )
( ×1 )
( ×1 )
A
Faceplate
B
Mounting sleeve
C
Trim plate
D
Wiring harness
E
Extraction key
Black: Ground
Yellow: Battery 12 V
White: Front speaker (left)
White/black
Gray: Front speaker (right)
Gray/black
Green: Rear speaker (left)
Green/black
Purple: Rear speaker (right)
Purple/black
Join the same color wires together.
Red: Ignition 12 V
Orange/white: Illumination
Brown: Tel muting
Blue/white: Remote (200 mA max.)
ENGLISH
EN_KD-A645_R640_540_440[J]f.indd 15EN_KD-A645_R640_540_440[J]f.indd 15 8/6/12 8:49:53 AM8/6/12 8:49:53 AM