JVC KD-BT11 Car Stereo System User Manual


 
ENGLISH
21
EXTERNAL DEVICES
This unit can be remotely controlled as instructed here
(with an optionally purchased remote controller). We
recommend that you use remote controller RM-RK50
with your unit.
Installing the lithium coin battery (CR2025)
Before using the remote controller:
Aim the remote controller directly at the remote
sensor on the unit.
DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
Warning (to prevent accidents and damage):
Do not install any battery other than CR2025 or its
equivalent.
Do not leave the remote controller in a place (such
as dashboards) exposed to direct sunlight for a long
time.
Store the battery in a place where children cannot
reach.
Do not recharge, short, disassemble, heat the battery,
or dispose of it in a fire.
Do not leave the battery with other metallic
materials.
Do not poke the battery with tweezers or similar
tools.
Wrap the battery with tape and insulate when
throwing away or saving it.
Remote sensor
1
Turns the power on if pressed briefly or
attenuates the sound when the power is on.
Turns the power off if pressed and held.
2 Changes the FM/AM/DAB bands with 5 U.
Changes the preset stations (or DAB services)
with D .
Changes the folder of the MP3/WMA.
While playing an MP3 disc on an
MP3-compatible CD changer:
– Changes the disc if pressed briefly.
– Changes the folder if pressed and held.
While listening to an Apple iPod:
– Pauses or resumes playback with D .
– Enters the main menu with
5 U.
(Now 5 U/D /2 R/F 3 work as the menu
selecting buttons.)*
*
5 U : Returns to the previous menu.
D : Confirms the selection.
3 Adjusts the volume level.
4 Selects the sound mode (iEQ: intelligent equalizer).
5 Selects the source.
6 For Bluetooth cellular phone:
– Answers calls if pressed briefly.
– Rejects calls if pressed and held.
Using the remote controller — RM-RK50
Continued on the next page
EN16-21_KD-BT11_003A_3.indd 21EN16-21_KD-BT11_003A_3.indd 21 11/30/07 3:12:06 PM11/30/07 3:12:06 PM