JVC KD-BT22 Car Stereo System User Manual


 
ENGLISH
45REFERENCES
Continued on the next page
Symptoms Remedies/Causes
USB device
Correct characters are not displayed (e.g.
album name).
For available characters, see page 42.
While playing a track, sound is sometimes
interrupted.
The tracks have not been properly copied into the USB
device. Copy tracks again into the USB device, and try
again.
The sound is interrupted or skipped during
playback of a USB device.
Turn off, then turn on the unit.
Connect the device again, when the sound is not yet
restored.
Bluetooth ®
The unit cannot be detected by the
Bluetooth device.
Search from the Bluetooth device again.
Reset the unit. When “Open...” appears on the display,
search from the Bluetooth device again.
The unit does not make pairing with the
Bluetooth device.
Enter the same PIN code for both the unit and target
device.
Phone sound quality is poor. Reduce the distance between the unit and the
Bluetooth cellular phone.
Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped during
playback of a Bluetooth audio player.
Reduce the distance between the unit and the
Bluetooth audio player.
Disconnect the device connected for “Phone.”
Turn off, then turn on the unit.
When the sound is not yet restored: Connect the player
again.
The connected audio player cannot be
controlled.
Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
(Operations depend on the connected audio player.)
Disconnect and connect the Bluetooth player again.
The unit does not response when you tried
to copy the phone book to the unit.
You may have tried to copy the same entries (as stored)
to the unit. Press number button 3 to exit.
EN38-45_KD-BT22[E]_003A_5.indd 45EN38-45_KD-BT22[E]_003A_5.indd 45 1/2/08 2:51:31 PM1/2/08 2:51:31 PM