JVC KD-DV6202 Car Stereo System User Manual


 
32
ENGLISH
Menu Item Setting
PICTURE
MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor.
OSD POSITION Select the on-screen bar position on the monitor.
1 : Higher position
2 : Lower position (Guidance below the disc setup
menu will disappear.)
FILE TYPE Select the file type to play.
AUDIO : Play MP3/WMA/WAV files.
VIDEO : Play DivX/MPEG Video files.
AUDIO
DIGITAL AUDIO
OUTPUT
Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal.
OFF : Cancels.
PCM ONLY : Select for an amplifier or a decoder incompatible
with Dolby Digital, DTS, MPEG Audio, or connecting
to a recording device.
DOLBY DIGITAL/PCM : Select for an amplifier or a decoder compatible with
Dolby Digital.
STREAM/PCM : Select for an amplifier or a decoder compatible with
Dolby Digital, DTS, and MPEG Audio.
DOWN MIX When playing back a multi-channel disc, this setting affects the signals reproduced
through the LINE OUT jacks (and through the DIGITAL OUT terminal when “PCM
ONLY” is selected for “DIGITAL AUDIO OUTPUT”).
SURROUND COMPATIBLE : Select to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby
Surround.
STEREO : Normally select this.
D. RANGE
COMPRESSION
You can enjoy a powerful sound at low or middle volume levels while playing a
Dolby Digital software.
AUTO : Select to apply the effect to multi-channel encoded
software (excluding 1-channel and 2-channel
software).
ON : Select to always use this function.
OTHERS
DivX
REGISTRATION
This unit has its own Registration Code. Once you have played back a disc in which
the Registration Code recorded, this unit’s Registration Code is overwritten for
copyright protection.
EN28-33_DV6202_001A_f.indd 32EN28-33_DV6202_001A_f.indd 32 1/11/06 2:39:39 PM1/11/06 2:39:39 PM