JVC KD-G411 Car Stereo System User Manual


 
23
ENGLISH
Main elements and features
1 (standby/on attenuator) button
Turns on and off the power and also
attenuates the sound.
2 SRC (source) button
Selects the source.
3 R (reverse) / F (forward) buttons
Searches for stations if pressed briefly.
Fast-forwards or reverses the track if
pressed and held.
Changes the tracks on the disc.
4 SOUND button
Selects the sound mode (C-EQ: custom
equalizer).
5 U (up) / D (down) buttons
U (up): Changes the FM/AM bands.
D (down): Changes the preset stations.
Changes the folder on the MP3/WMA
discs.
6 VOLUME +/– buttons
Adjusts the volume level.
The receiver is equipped with the steering
wheel remote control function.
See the Installation/Connection Manual
(separate volume) for connection.
This receiver can be remotely controlled as
instructed here (with an optionally purchased
remote controller). We recommend that you use
remote controller RM-RK60 with your receiver.
When operating, aim the remote controller
directly at the remote sensor on the
receiver. Make sure there is no obstacle in
between.
Installing the lithium coin battery
(CR2025)
Warning:
Store the battery in a place where children
cannot reach to avoid risk of accident.
To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, or
heat the battery or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
Caution:
Using the remote controller — RM-RK60
EN18-23_KD-G411[EX_EU]f.indd 23 10/7/04, 11:30:04 AM