JVC KD-HDR40 Car Stereo System User Manual


 
ENGLISH
27REFERENCES
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptoms Remedies/Causes
General
Sound cannot be heard from the speakers. Adjust the volume to the optimum level.
Check the cords and connections.
The unit does not work at all. Reset the unit (see page 3).
“AUX IN” or “EXT INPUT” cannot be
selected.
Check the “SELECT SRC=AUX IN” or “EXT
IN” setting (see page 24).
FM/AM
SSM automatic presetting does not work. Store stations manually.
Static noise while listening to the radio. Connect the antenna firmly.
“AM” cannot be selected. Check the “SELECT SRC=AM” setting (see
page 24).
Sound quality changes when receiving
HD Radio stations.
Fix the reception mode either to “DIGITAL” or
ANALOG” (see pages 10 and 23).
No sound can be heard. Check the power supply to the antenna when using
active type.
• “ANALOG” is selected when receiving all digital
broadcast of HD Radio station. Select “DIGITAL” or
AUTO” (see pages 10 and 23).
• “DIGITAL” is selected when receiving weak digital
signals or receiving conventional radio broadcast.
Select “ANALOG” or “AUTO” (see pages 10 and
23).
The clock becomes wrong when receiving
HD Radio stations.
Set “CLOCK ADJ” to “OFF” (see page 22).
Disc playback
Disc cannot be played back. Insert the disc correctly.
CD-R/CD-RW cannot be played back.
Tracks on the CD-R/CD-RW cannot be
skipped.
Insert a finalized CD-R/CD-RW.
Finalize the CD-R/CD-RW with the component which
you used for recording.
Disc can neither be played back nor ejected. Unlock the disc (see page 12).
Eject the disc forcibly (see page 3).
Continued on the next page
KD-HDR40[J].indb 27KD-HDR40[J].indb 27 09.11.10 3:41:30 PM09.11.10 3:41:30 PM